MegaChlor Saltwater Chlorine Generation System
MegaChlor Saltwater Chlorine Generation System
The MegaChlor requires no pool or swim spa modification. Simply attach the control panel near the pool, add 2 pounds of salt per 100 gallons of pool water, hang the electrode into the water, and plug it in.
- For pools up to 17,000 gallons
- 10 Adjustable Power Levels: built-in ability to control chlorine production
- Easy-To-Use Control Box: 3 buttons and 4 lights for operation; conveniently mounts to the pool or the spa’s skirt
- Electrode simply drapes over the side of the pool/spa into the water (in-line kit available)
- Automatic Cleaning: polarity reverses periodically to clean and help reduce calcium buildup
- Salt Level Indicator Technology: lets you know when to add salt to maintain or boost chlorine production
- Boost Mode allows for manual control
- 2,000 to 4,000 PPM salt concentration
- Easy-To-Clean Electrode
- No pool/spa modifications required, and pool/spa does not need to be turned on
- 15 foot power cord, 10 foot electrode cord
- Supports both 110 and 220 VAC supply voltages; also supports low voltage 12 VDC
- High Current Shutdown to protect the power supply and titanium plates if there is too much salt
The MegaChlor makes chlorine on a 3-hour cycle. Every 3 hours, it starts making chlorine, and based on the power level, it will run for a fixed amount of time and then switch to standby mode. At the next 3-hour mark, it will start again. For example, at power level 5, it will be on for 45 minutes, off for 2 hours and 15 minutes (3 hours minus 45 minutes), on for 45 minutes, etc. If you use the spa and let the MegaChlor know by pressing the boost button, it will be put into boost mode and run for 3 times the normal amount of time. That way, the MegaChlor can get a jumpstart on replenishing the chlorine that just got used.
Share
Couldn't load pickup availability
